8999127: v1 14/08/2018
Page 1.9 of 1.10 pages
Original instructions (ENGLISH)
Website: www.spearheadmachinery.com
1.3
Identification
Each Quadsaw is equipped with a serial plate; see Figure 1.3 that includes the following data in this order:
- EC Marking.
- Manufacturer marking.
- Name and address of the manufacturer.
- Machine Whole Goods Code (WGC).
- Machine Product Group Code.
- Serial number of the machine.
- Year of construction.
- Mass in kg.
- Model year.
Figure 1.3
Data on the manufacturer’s plate should always be referred to when requesting assistance and/or supply of spare
parts.
This data can identify the Quadsaw and its characteristics, certifying that it responds to current regulations. For this
reason the plate
should never therefore be removed
nor be used for other purposes; if the Quadsaw is dismantled, it
should be destroyed to prevent any form of abuse.
1.4
Machine general specification
Quadsaw HXF series (1)
1402
RHD 280
Working Width (mm)
1400
Blade Speed (rpm)
4000
Blades
4 x 340mm diameter
Teeth per Blade
60
Material
Hardened metal with special teeth HM precision blade
Performance (mm)
5-100mm branch diameter
Application
Vertical
Oil Flow (11.2cc)
25 l/min. Maximum 200 bar
Required Hydraulic Connections
1 x Single acting, 1 x Return, 1 x Drain
Working Speed
Up to 5 km/h
e.g Twiga 320
350 PTO rpm
Notes:
(1) Spearhead constantly reviews and improves product designs and reserve the right to change this
information. Actual machines may vary from the above specification. Contact your Spearhead Sales
representative if you have any queries.
1.5
Sound Level
Noise measuring has been made on the machine during normal working conditions at GreenTec A/S in Denmark, with
an Elma 1350B Noise measurer, ICE 651 type II.
The energy A-weighted Sound pressure is lower than 84 dB (A).
Supplier Information
Machine
Whole Goods
Code (WGC)
Product Group Code
Machine Serial
Number
Production Year
Weight (kg)
Model Year
