8999127: v1 14/08/2018
Page 3.1 of 3.3 pages
Original instructions (ENGLISH)
Website: www.spearheadmachinery.com
3
Machine Preparation
Before starting to use the Quadsaw it is mandatory to read and perfectly understand the instructions contained below.
WARNING!
Read the instructions contained in Section 2
“Safety”.
3.1 Transport
The Quadsaw is supplied fully assembled. Spearhead recommends that the Quadsaw is stored on a suitable pallet
when not in use. If it needs to be moved use a pallet lifter or forklift. Alternatively it can be lifted with an authorized rope
or something similar, as illustrated in Figure 3.1. The 1402 weighs 48 kg. The rope must be authorized for the required
weights as a minimum, but preferably more for greater safety.
To transport by carriage make sure that the Quadsaw is securely anchored to the floor with suitable standard ropes or
straps, in accordance with the requirements set out in Section 4.4.
Figure 3.1
CAUTION!
The machine must be lifted with maximum care and by using lifting devices suitable for the weight
and size of the same.
CAUTION!
Due to the danger of this operation, it must be performed by expert and responsible personnel.
For the lifting device to be used
it is mandatory
to comply with the safety regulations prescribed by the laws in
force in the country where the machine is used. Do not touch the Quadsaw and do not stop within the
operating range of the crane.
After transportation, check that the machine was not damaged in any way. Spearhead cannot be held responsible for
any damage caused by handling carried out any differently from that described in the manual.
