8999127: v1 14/08/2018
Page 3.3 of 3.3 pages
Original instructions (ENGLISH)
Website: www.spearheadmachinery.com
3.2.2.3 Fit the bolts, flat washers and Nylock nuts and tighten.
For Quick Release Mounting
3.2.2.4 Use appropriate protective gloves align the reach arm mounting face to the Quadsaw with an aim at lining up
the mounting plate and slot. Ensure the blade is mounted, so the direction of rotation of the saw goes down
3.2.2.5 Switch the tractor off and engage the parking brake.
3.2.2.6 Slide the mounting plate through the Quadsaw slot and secure the reach arm to the Quadsaw with the quick
release pin. See Figure 3.4
3.2.2.7 Connect the hydraulic hoses so the blades run in the correct direction. The case drain hose shall go in free to
the hydraulic oil tank. Pressure (P) and Return (T) mounting locations are shown in Figure 3.3. Note however that
Figure 3.3 shows quick release fittings (optional). For torque settings see Section 5.1.3.
3.2.2.8 Check the hydraulic system for leaks.
3.2.2.9 First time the machine is used; measure the blade rpm. The machine works at its optimum performance when
it runs at 4000 rpm (25 L/min).
Figure 3.2
Figure 3.3
Figure 3.4
