8999127: v1 14/08/2018
Page 1.4 of 1.10 pages
Original instructions (ENGLISH)
Website: www.spearheadmachinery.com
Quadsaw LRS 1402 Rotary Saw Blade
The Quadsaw is used for cutting branches and trees up to a maximum diameter of 100 mm without the branches
being torn.
Branches with a diameter over 40 mm must be cut one at the time.
Vertical cutting is allowed up to a 45 degree angle. Horizontal cutting is possible on hedges with a width up to 80
cm. and a branch diameter up to 20 mm; thicker branches might stop the blades and get stuck in the machine. This
manual is an integral part of the Quadsaw, defining the scope for which it was built, and contains all the information
required for its proper and safe use.
Regular machine operation depends on its correct use and adequate maintenance: it is advisable, therefore, to
follow these instructions carefully to prevent any situation that could compromise
the machine’s operation and
durability. It is also important to follow that which is described in this manual since Spearhead declines any liability
resulting from negligence of from not observing these norms, since it would result in the warranty being annulled.
It is mandatory to verify upon delivery that the Quadsaw is integral and complete in all its parts. Any complaints
must presented in written within 8 (eight) days from receiving the machine. Spearhead can however be contacted
at any time for immediate and precise technical assistance and anything required for optimum operation and
maximum performance of the equipment. Upon receiving the product, carefully read the manual and carefully
follow the instructions contained in it.
IMPORTANT
All technical material or description in this manual is exclusively owned by Spearhead who prohibits
the complete or partial reproduction of the same unless written approval has been issued by the
Spearhead.
Data, illustrations and descriptions in the manual cannot be considered binding. Spearhead reserves
the right to make changes at any time that it considers to be suitable for improvement or for a
constructive or commercial requirement.
This manual reflects the state of techniques at the time of marketing the saw blade and cannot be
considered inadequate if updated at a later date due to modifications of related legal provisions.
Spearhead declines any and all liability for damages caused by the saw blade to persons,
animals or property, resulting from use other than that described in this manual, or due to
damage caused by negligence or by not observing the instructions contained in this manual.
The manual should be carefully stored in a suitable area to guarantee its physical integrity; it should
be easy to access by anyone authorised to consult it. The manual is an important document that
should accompany the Quadsaw and all users should be held responsible for safeguarding it.
For additional information or clarifications regarding anything contained in this manual, or if the
manual deteriorates, is destroyed or lost, using the saw blade is prohibited and it is mandatory to
request a new manual as soon as possible exclusively through:
Spearhead Machinery Limited
Green View, Salford Priors,
Evesham, Worcestershire, WR11 8SW
Direct download via Spearhead’s online PDF manual library
http://dealerinside.spearheadmachinery.com/dealerinside/manuallibrary/default.aspx
For technical enquiries email:
The following manual is an integral part of the product and must be stored carefully, in order
that it keeps its integrity and can be consulted repeatedly throughout the entire life of the
Quadsaw.
The Quadsaw is manufactured to conform to the provisions contained in Directive 2006/42/EF. It is
therefore equipped with EC marking and accompanied by the following EC conformity declaration.
