MODE 3.1 Installation Instructions
Page 32
Party Mode
Pressing the Volume Knob for longer than 2 seconds will mute/un-mute the entire system, (all
zones, speaker relay mutes) unless
“This Zone Ignores Other Zone Initiations”
is selected
under
Zone Setup/Whole House/Mute
in
EZ-Tools
for a given zone. If selected, that zone
will ignore the Whole House Mute Commands.
1.
Press and Hold
the
Volume Knob
for
longer than 2 seconds
to
mute all
zone pre-
amps and speakers controlled with Speaker Relay Mutes. A red
MUTE
will appear at the
top of the LCDs of all MODE 3.1s in the system and the selected Source Button will blink
about once per second in zones controlled with EZ-Pads.
2.
Press and Hold
the
Volume Knob
for
longer than 2 seconds
to
un-mute all
zone
preamps and speakers controlled with Speaker Relay Mutes. The red
MUTE
will turn off
at the top of the LCDs of all MODE 3.1s in the system and the selected Source Button will
resume constant illumination in zones controlled with EZ-Pads.
SOURCE CONTROL
DVD, CD, Cable, Sat, DVR, Servers, etc.
1. From the
MODE Main Menu
, roll the
Scroll Wheel
to
highlight
a
Source
and then
press the
Click Button
to
select
the
Source
. The selected source name will appear at
the top of the LCD. Any Virtual Buttons programmed for that source will appear in the
LCD. (Refer to
Figure 32
)
2.
Press
the
Hard Keys
for basic device controls
as programmed
such as
Play, Pause,
Skip,
etc.
3.
Roll
the
Scroll Wheel
to highlight
Virtual Button
functions
as programmed
.
4.
Press
the
Click Button
to
execute
the Virtual Button function highlighted in step 3.
MZC Tuners
All MZC Tuner Preset Frequencies and Controls will default to the Virtual Buttons. Additional
controls may have been programmed to the Hard Keys.
1.
Roll
the
Scroll Wheel
to
highlight
Tuner 1
or
2
.
2.
Press
the
Click Button
to
select
the
highlighted Tuner
. The selected tuner will appear
at the top of the LCD with the Presets and functions displayed in the LCD. (Refer to
Fig-
ure 33
)
2.
Roll
the
Scroll Wheel
to
highlight
a desired
Preset
.
3.
Press
the
Click Button
to
select
the Preset highlighted in step 2.
4. Use the
Scroll Wheel
and
Click Button
to
highlight
and
execute
Tuner functions
such as
AM/FM, Tune Up/Down
, etc.
iPod
All iPod functions (typical iPod Menus) will default to the Virtual Buttons. Additional controls
may have been programmed to the Hard Keys.
1.
Roll
the
Scroll Wheel
to
highlight
an
iPod
.
2.
Press
the
Click Button
to
select
the
highlighted iPod
. The selected iPod will appear at
the top of the LCD and the iPod Main Menu will open in the LCD. (Refer to
Figure 34
)
P3 93.1 MHz
P4 93.9 MHz
P5 95.5 MHz
P6 106.7 MHz
P1 91.5 MHz
P2 92.3 MHz
TUNER 1 106.7 MHz
P3 93.1 MHz
P4 93.9 MHz
P5 95.5 MHz
P1 91.5 MHz
P2 92.3 MHz
SUBTITLE
ZOOM
DISPLAY
ANGLE
MENU
AUDIO
DVD
SUBTITLE
ZOOM
DISPLAY
ANGLE
AUDIO
Figure 32
DVD Virtual Buttons
Figure 33
MZC Tuner Virtual Buttons
Albums
Genres
Songs
Composers
Playlist
Artists
NANO
Albums
Genres
Songs
Composers
Artists
Figure 34
iPod Main Menu