MODE 3.1 Installation Instructions
Page 28
To program the MODE 3.1 shown in
Figure 24
:
1. Left click the
Tuner 1 Source Icon
on the
Virtual Keypad
. It will
highlight blue. This indicates the Tuner 1 ‘bank’ has been selected.
Volume
2. Left Click the
Volume Knob Up Arrow
. The Tuner 1 icon will
turn red indicating which source is being programmed and the
Up Arrow will highlight blue to indicate which button is being
programmed.
3. Left click the
CMD MZC Cmds Tab
and expand the
Audio Level
Commands Tab
by left clicking the ‘+’ sign or double left clicking
‘Audio Level Commands’. The list of all MZC audio commands will
open.
4. Scroll down the list to fi nd the
Zone 2 Commands
. Double left
click
Zone 2 Volume Up
. The Zone 2 Volume Up Command
will appear in the
Button Properties Window
. Right click the
Volume Up Arrow
. In the pop-up, highlight and left click
Punch
Key’s Commands
to make the volume up command available to
all sources.
5. Next, left click the
Volume Knob Down Arrow
. Double left click
Zone 2 Volume Down
in the
CMD MZC Cmds List
. The Zone
2 Volume Down Command will appear in the
Button Properties
Window
. Right click the
Volume Down Arrow
. In the pop-up,
highlight and left click
Punch Key’s Commands
to make the
volume up command available to all sources.
Mute
6. Next is the Mute Button. The Volume Knob can be pushed in to
execute a programmed command or macro. It is recommended
that the Knob press function be used for Zone Mute. For this ex-
ample, MZC pre-amp zone mute will be used.
Right click the inside section of the
Volume Knob
. In the pop-
up, highlight and left click the
Mute (Preamp) Key
as shown
in
Figure 26
. This will confi gure the key for
Zone
and
Whole
House Mute
and punch the commands to all banks. The key will
highlight green to indicate special whole-house functionality.
When this button is pressed for less than 2 seconds, the zone will
mute. When it is pressed again for less than 2 seconds, it will un-
Figure 25
Placing The Volume Up Command
Figure 26
Placing The Zone/Whole/House Mute Command
Figure 27
Placing the Zone/Whole-House Power Command
mute. When the Mute Key is pressed for longer than 2 seconds, this initiates whole-house muting (all zones mute). When
pressed again for longer than 2 seconds, all zones are unmuted.
Power
7. Right click the
MODE Power Button
. In the pop-up, highlight and left click
Zone Power Off Key
as shown in
Figure
27
. This will confi gure the key for
Zone
and
Whole House Off
and punch the commands to all banks. The key will
highlight green to indicate special whole-house functionality.
When the
Power Key
is pressed for less than 2 seconds, the local zone will turn off, and typically, the common sources
will stay on until the last zone is turned off. Additionally, when the Power Key is pressed for longer than 2 seconds, this
initiates whole house power off (all zones will turn off) and this action will typically also turn off the common sources.