5
1. CERTIFIED QUALITY
OUR STOVES ARE TESTED IN ACCORDANCE WITH DIN EN 13240. DECLA-
RATION OF PERFORMANCE IS AVAILABLE AND CAN BE VIEWED AT WWW.
SPARTHERM.COM
These stoves have self-closing combustion chamber doors which means the
doors are only opened when the fireplace has to be serviced (e.g., to clean
the combustion chamber or add more fuel). For safety reasons, the closing
mechanism must not be tampered with; furthermore, any such action would
render the warranty and operating licence null and void. The guarantee and
operating licence are also rendered invalid if the customer modified the
technology of any other area of the stove.
1.1 SCOPE OF DELIVERY
• Combustion chamber made of eboris 1300 (refractory concrete) chamotte
• Primary and secondary air supply
• Pull-out ash drawer
• Self-closing combustion chamber door with high-temperature-resistant ceramic
glass pane
• Heat-resistant glove (
Caution:
The heat-resistant glove provided serves only as
thermal protection and is not fire-proof!)
• Rating plate (For attachment see „3.4 Rating plate“ on page 33)
• Supplied pre-assembled in transport-friendly disposable cardboard packaging
• Optional storage stones
• Integrated cleaning system (a4 H
2
O/RLU and a6 H
2
O only)
• Pump thermostat, thermal discharge safety device ¾¨, vent valve (ambiente a4
H
2
O and a6 H
2
O only).
1.2 TRANSPORT DAMAGE
Please inspect the goods
immediately
upon delivery (visual inspection).
Make a note of any damage on your delivery document and inform your
stove or fireplace fitter. Protect the visible elements of the stove from soil-
ing and damage during installation. Only permitted and sufficiently strong
transport aids may be used to transport your stove.
The following points must be noted to ensure safe and problem-free
transport:
• The stove should always be transported in the upright position or tilted
slightly backwards (the back of the stove is labelled).
• A hand truck used as a handling aid must load the stove from the rear
only
2. INSTALLATION INSTRUCTIONS
The assembly and installation of your stove should be carried out by a
specialist. Before your stove is assembled and installed you should meet
with the master chimney sweep responsible for such matters in your area
to discuss the suitability of your chimney and the installation location and
to clarify other matters.
2.1 BASIC REQUIREMENTS FOR INSTALLATION
For installation, connection and operation of the stove, all necessary
national and European standards, as well as local regulations (DIN, DIN EN,
state construction ordinances, firing ordinances, etc.) must be complied
Chapters 1/2
