23
2.8.1 AMBIENTE a4 H
2
O / a6 H
2
O CONNECTIONS
The connections are on the the rear, inside or underside of the stove (Fig.
15a
-
15c
and 16a
-
16c
).
a4 H
2
O/ a4 H
2
O RLU
A
Return ¾¨ internal thread
B
Flow ¾¨ internal thread
C
Safety heat exchanger drain ½¨ internal thread
D
Safety heat exchanger inlet ½¨ internal thread
E
Vent valve
3
/
8
¨
a6 H
2
O
A
Return ¾¨ internal thread
B
Flow ¾¨ internal thread
C
Safety heat exchanger drain ½¨ internal thread
D
Safety heat exchanger inlet ½¨ internal thread
E
Vent valve
3
/
8
¨
Fig. 15a
Front view
Fig. 15b
Rear view
Fig. 15c
Bottom view
Fig. 16a
Rear view
Fig. 16b
Front view
Fig. 16c
Bottom view
To facilitate installation of piping, etc., when making a connection through
the floor, at our homepage
.
The connections are fitted with protective
caps and brass plugs for transport. This must be removed prior to
installation.
The connections are labelled and must not be used for other purposes! In
particular, the integral safety device (safety heat exchanger) should not
be used to heat water. an installation template can be downloaded from
the dealer login section.
The installation template is only valid in
combi-nation with the flexible connection kit!
Alternatively, we can
supply a
Chapter 2
