Using the same methods you learned with your first component (the 10K
Ω
resistor), solder into place, and trim the extra lead length.
Next, locate the 330
Ω
Resistors (x3). They each have this pattern of strips
on them: ORANGE, ORANGE, BROWN, GOLD.
A 330
Ω
resistor looks like this:
There should be three of them:
Locate the position on the PCB:
Using the same methods as before, solder into place and trim the extra
lead length.
When you’re done soldering these remaining resistors, your board should
look like this:
TOP:
Page 5 of 20
