Your solder joints should look like this - a tiny volcano.
Clip off any excess legs.
The Other Resistors
Now that you’ve successfully soldered in the 10K resistor, you’re ready to
begin soldering in in the remaining resistors.
Note, before soldering in each resistor, double check you have the correct
value by ensuring that the color markings are correct.
Locate the 100
Ω
Resistor. It has this pattern of strips on it: BROWN,
BLACK, BROWN, GOLD.
A 100
Ω
resistor looks like this:
Locate the position on the PCB:
Page 4 of 20
