Simon Tilts Assembly Guide
Introduction
Simon Tilts is a memory game very similar to Simon Says, but instead of
pressing buttons, the player is challenged to rotate the device in a specific
pattern. It comes as a PTH soldering kit, and it’s up to you to solder it all
together! You can buy the complete kit here.
If you’re new to soldering, the Simon Tilts PTH Kit is a great place to start.
This assembly guide will take you through each component in the kit and
show you how to solder it into place.
The assembled Simon Tilts PTH Kit
Suggested Reading
If you’d like more general knowledge about PTH soldering, then we suggest
checking out these following other tutorials:
• How to Solder - Through-hole Soldering
• Decoding Resistor Markings
• Diode and LED Polarity
• Electronics Assembly - Washing
• Video - SparkFun Infrared Sensor Overview
Necessary tools and supplies
• Soldering Iron
• Solder
• Cutters
Suggested additional tools and supplies
• Safety Glasses
• Flux Pen
• Solder Wick
Page 1 of 20
