Form 43343050
Jan 2014
-9-
7.0)
TYPICAL LAYOUTS
LEGEND
Control Unit
Draft Inducer Unit
10Ft. Body Section
180 U- Bend *
30 FT. SYSTEM
40 FT. SYSTEM
40 FT. SYSTEM
(with optional U-Bend)
50 FT. SYSTEM
NOTES:
NOTES:
NOTES:
NOTES:
1.
In all configurations, the control unit must be connected directly to a 10 ft. aluminized steel body section in
all systems....
2.
An optional U-Bend can be used on Models CTS/A100-40 and CTS/A125-40 to create a “U” configuration.
The control box side of the heater has a larger heat output and higher tube temperatures because the flame is
located at the control box. For this reason the control box end of the heater should be located closest to large
bay doors and end walls.
WARM
HOT
WARM
