– 2 –
Split Inverter Air-to-Water Heat Pump
Section 1: Read Before Proceeding
Hazard Definitions
The following terms are used throughout this manual to bring
attention to the presence of potential hazards or to important
information concerning the product.
Indicates an imminently hazardous situation, which
if not avoided, WILL result in death, serious injury or
substantial property damage.
Indicates an imminently hazardous situation, which
if not avoided, COULD result in death, serious injury
or substantial property damage.
Indicates an imminently hazardous situation, which
if not avoided, MAY result in minor injury or property
damage.
Used to notify of special instructions on installation,
operation or maintenance, which are important to
equipment, but not related to personal injury hazards.
Failure to comply with these recommendations will void the warranty.
Benefits and Features
■ The SIS-060 Air-to-Water Heat Pump uses Inverter
technology to precisely match the heating or cooling load.
It contains an Enhanced Vapor Injection compressor for
maximum performance in extreme heating conditions, and
is installed in a split configuration, keeping all water and
plumbing indoors, with only the compressor, fan and airside
heat exchanger located outdoors.
Advanced Controls
Unit function is managed by a parametric microprocessor allowing
on site adjustment to tune the operation to match specific operating
requirements.
Easy Installation
The split configuration allows individual placement of the Indoor
and Outdoor modules, up to 35' apart, and greatly simplifies
plumbing installation.
Quiet Operation
The insulated housing, advanced fan profile, and variable speed
fan and compressor all combine to achieve a low noise level of
50dBa @ 3 meters (O.D. unit) and 38dbA @ 3 meters (I.D. unit).
Efficient Energy Transfer
The SIS-060 is equipped with high efficiency, large surface
area energy exchangers for both the Outdoor air to refrigerant
heat transfer and the Indoor refrigerant to water energy transfer.
Low Ambient Temperature Cooling Operation
The SIS-060 is capable of operating in cooling mode in ambient
temperatures as low as 5°F.