![background image](http://html.mh-extra.com/html/sp/virtis-wizard-2-0/virtis-wizard-2-0_operators-manual_1338597027.webp)
VirTis Wizard 2.0
Maintenance Settings
Revision 001, 03/09
19
© SP Industries, Inc. 2009
Factory Settings
The Factory Settings menu is password-protected. These settings ensure that your
freeze dryer functions according to manufacturer specifications.
For assistance, contact SP Service at (877) 548-4666. For factory setting parameters,
refer to Appendix B: Factory Settings.
Service Routines
The Service Routines menu is password-protected. This menu includes pre-
configured system parameters based on your freeze dryer and specifications.
For assistance, contact SP Service at (877) 548-4666. For service routine
parameters, refer to Appendix B: Factory Settings.
Relay Test
Access the Relay Test menu to perform output tests on each solid-state relay. These
tests can assist when troubleshooting electrical or mechanical problems. Additionally,
you can use the relay tests to observe the output sequence during a freeze dry run.
Only a qualified SP Industries Technician should interpret the results of a relay
function test. For relay test parameters, refer to Appendix B: Factory Settings.
Note:
All control loops are disabled unless you are viewing the Synoptic screen.
Vacuum Pump Oil Time
The Vacuum Pump Oil Time screen is designed to help protect and prolong the life of
your vacuum pump. This screen displays the time since the last oil change
(hours/minutes). The Vacuum Pump Maintenance alarm triggers when the Vacuum
Pump Oil Time exceeds the Pump Oil Change Hours. A qualified technician should
reset the Vacuum Pump Oil Time after each service.
Consult your freeze dryer and vacuum pump manuals for more information about your
vacuum system. For more information about the alarm, refer to Appendix A:
Troubleshooting.
WARNING!
CHANGING THE FACTORY SETTINGS MAY CAUSE EQUIPMENT MALFUNCTION NOT
COVERED BY YOUR WARRANTY. ONLY A QUALIFIED SP INDUSTRIES TECHNICIAN SHOULD ACCESS
AND MODIFY THE FACTORY SETTINGS MENU.
WARNING!
CHANGING THE SERVICE ROUTINES MAY CAUSE EQUIPMENT MALFUNCTION NOT
COVERED BY YOUR WARRANTY. ONLY A QUALIFIED SP INDUSTRIES TECHNICIAN SHOULD ACCESS
THE SERVICE ROUTINES MENU.
WARNING!
VACUUM PUMP OIL REQUIRES REGULAR SERVICE. FAILURE TO SERVICE YOUR VACUUM
PUMP MAY RESULT IN DAMAGES NOT COVERED BY THE WARRANTY.