SP Scientific FTS FLEXICOOL IMMERSION COOLERS FC100, Operator'S Manual

Page: 9 / 38

Rev 001, 10/13 1
© SP Scientific 2013
Chapter
1
Introduction
Overview
THE FTS SYSTEMS FLEXICOOL IS NOT INTENDED FOR USE WITH
EXTREMELY FLAMMABLE FLUIDS SUCH AS ISOPENTANE (C
5
H
12
).
The FTS Systems FlexiCool FC50 and FC100 are mechanically refrigerated
Immersions Coolers that offer high heat removal and rapid cool down capabilities. The
FlexiCool meets the requirements for a variety of applications and features an optional
temperature controller that allows for programming and/or control from remote
locations.
The FTS Systems FlexiCool comes equipped with one (1) of three (3) standard probe
configuration that may be placed wherever direct cooling and heat removal from
ambient to -100 °C is required. These probes allow the unit to achieve maximum
efficiency through the direct expansion of refrigerant inside the probe, which
eliminates the need for a secondary medium or pumping.
The three (3) standard probe configurations are:
Cartridge Probe (P1) Flexible Probe (P2) Coil Probe (P4)
Note: For more information on the standard probes, refer to the Probes section of
Chapter 3: Operation. Custom probes are available upon request.
FC100
FC50