SOYO SY-P4-645DX DRAGON Ultra User Manual Download Page 93

Page: 93 / 173

Highpoint HPT372 Driver Installation

SY-P4-645DX DRAGON Ultra

Install driver during Windows 2000 installation

1. Go to “d:\raid\hpt372\” directory, (assuming that your

CD-ROM is drive d) copy all the files and directory to a
floppy disk.

2. If Windows 2000 is installed from the floppy drive, please let

the installing program run automatically. If Windows 2000 is
installed from the CD-ROM drive, please

key when the

message

Press F6 if you need to install third party SCSI

or RAID driver

appears.

3. Press

key to specify additional devices when the

Windows

2000 Setup

window appears.

4. Insert the floppy disk of driver, then press

Enter

to continue.

5. The system will ask whether to install driver under

WinNT

under

Windows 2000

, please select to install driver under

Windows 2000.

6. In the follow-on window of device type, please select

Other

and press

Enter

to continue.

7. The follow-on interface will list the devices to be installed, in

which

HPT370/HPT372 UDMA/ATA RAID Controller

item

should be included (If users want to install other devices,
please operate at this time. If all devices have been
successfully installed, please go to next.)

Summary of Contents for SY-P4-645DX DRAGON Ultra














































































































































































Search results

Summary of Contents for SY-P4-645DX DRAGON Ultra

Reviews:

Related manuals for SY-P4-645DX DRAGON Ultra

Brands by name

Popular brands

SOYO SY-P4-645DX DRAGON Ultra, User Manual

Search results

Summary of Contents for SY-P4-645DX DRAGON Ultra

Reviews:

Related manuals for SY-P4-645DX DRAGON Ultra

Brands by name

Popular brands