97
1.
Select
6. Set Disk Mode
in the menu and press
Enter
to
confirm.
2.
Select the disk mode to be set in the popup selection box and
press
Enter
to confirm.
VII. Set Boot Disk.
The following steps shall be taken to set the boot disk:
1.
In the menu, select
7. Set Boot Disk
item, press
Enter
to
confirm.
2.
In the validated channel status zone, use the arrow key to
select the boot device and press
Enter
to confirm.
Note:
1.
The
Set Boot Disk
item appears on condition that no hard
disk is connected to IDE on motherboard.
2.
After the boot disk is set, its status will become
Boot
.
Highpoint ATA RAID Management Software
Install Software
Insert SOYO driver utility CD, Highlight the driver
HighPoint Utility
for Win 9x/ME/2000/NT/XP
and click ok.
To manually install the RAID Administrator, insert the SOYO driver