SOYO SY-P4-645DX DRAGON Ultra User Manual Download Page 152

Page: 152 / 173

148

Playback time field

displays the current playback time.

File name and status field

displays the file name, audio format,

sound effects selection, playback mode, Karaoke mode, and
SPDIF status.

Button Function

Playlist

Playlist allows you to insert, remove, and record the audio

files into and from the playlist. The audio files include wave, MP3,
and MPEG-1 encoding files.

Previous song

: Loads the previous audio file of playlist. If current

file is the first file, the last one will become the current selection.

Next song

: Loads the next audio file of playlist. If current file is the

last one, the first file will become the current selection.

Playback

: Starts to playback the current audio file.

Pause/Restart

: Pauses or restarts the current playback action.

Stop

: Stops playback.

Playback backward for 10 seconds

Playback the current to 10

seconds before.

Summary of Contents for SY-P4-645DX DRAGON Ultra














































































































































































Search results

Summary of Contents for SY-P4-645DX DRAGON Ultra

Reviews:

Related manuals for SY-P4-645DX DRAGON Ultra

Brands by name

Popular brands

SOYO SY-P4-645DX DRAGON Ultra, User Manual

Search results

Summary of Contents for SY-P4-645DX DRAGON Ultra

Reviews:

Related manuals for SY-P4-645DX DRAGON Ultra

Brands by name

Popular brands