96
5.
In the validated channel status, select the target disk of the
mirror array and then press
Enter
.
6.
In the menu, select
3. Start Duplication Process
and press
Enter
to confirm.
7.
Press
Y
when asked
The last time rebuild not completed.
Continue?
Note:
When there is no RAID 1 array, system will prompt user
No enough
disks
at the second step, and rebuild cannot continue.
IV. Add Spare Disk
The following steps shall be taken to add the spare disk.
1.
In the menu, select
4. Add Spare Disk
and press
Enter
to
confirm.
2.
In menu, select
1. Select Mirror Array: None
and press
Enter
to confirm.
3.
In the validated channel status, select the mirror array and
press
Enter
to confirm.
4.
In the menu, select
2. Select Spare Drive: None
and press
Enter
to confirm.
5.
In the validated channel status, select the spare disk to be
added and press
Enter
to confirm.
V. Remove Spare Disk
The following steps shall be taken to remove the spare disk.
1.
In the menu, select
5. Remove Spare Disk
and press
Enter
to confirm.
2.
The
1. Select Mirror Array: None
item appears in the menu.
3.
In the validated channel status, select the spare disk to be
removed and press
Enter
to confirm.
VI. Set Disk Mode
The following steps shall be taken to set the disk mode.
