133
5. Specify the drive path where NT drivers are in (such as
D:\Audio\cmi8738_6Ch\NT40\Drv).
6. Select “C-Media CM8738,” and press “OK”.
7. Select proper I/O value.
8. Press “OK.”
9. Restart the system when being asked.
10. Now, you have already installed the PCI Audio Adapter
under Microsoft Windows NT 4.0 successfully. if you want
to install the Windows applications, continue the following
steps:
11. Click “Start”.
12. Select “Run”.
13. Key in drive path where the Windows NT application
installation program are in; for example, “D:\Audio\
cmi8738_6Ch\NT40\Drv\APP\SETUP.EXE”
14. Click “OK” to start the installation procedure, and follow the
on-screen instructions to complete the installation. When
all of application software has been installed, shut down
the Windows NT system, and then reboot your system.
C-Media Power Mixer
Volume Control
For each output signal, the control slider regulates the loudness
whereas a horizontal slider the balance between the two
speakers. The mute button can temporarily stop the output
without changing slider positions. A button with a lit LED means
the output is available, and vice versa. Several output signals
can usually be enabled at once.
