Highpoint HPT372 Driver Installation
SY-KT400 DRAGON Ultra
102
Installing Driver During OS Installation
Install driver during Windows NT4.0 installation
1. Go to “d:\raid\hpt372_234\” directory, (assuming that
your CD-ROM is drive d) copy all the files and
directory to a floppy disk.
2. Press
F6
key when the system prompts
Setup is
inspecting your computer’s hardware configuration.
3. Press
F6
key, the installation will continue. Later,
installation program will remind user to press
S
key to
specify other devices. Please press
S
key.
4. In
the
follow-up
Device Type
window, select
Other
item,
then press
Enter
to confirm.
5. The installation program will prompt users to insert the
floppy disk of driver. Please insert it and then press
Enter
to confirm.
6. In the follow-on window, select
HPT370/HPT372
UDMA/ATA RAID Controller
, then press
Enter
to
confirm.
7. The follow-on interface will list the devices to be installed,
in which
HPT370/HPT372 UDMA/ATA RAID Controller
item should be included. (If users want to install other
devices, please operate at this time. If all devices have
been successfully installed, please go to next.)
8. Press
Enter
to continue the installation of Windows NT4.0.
