Highpoint HPT372 Driver Installation
SY-KT400 DRAGON Ultra
104
Install driver during Windows XP installation
1. Go to “d:\raid\\hpt372_234\” directory, (assuming that
your CD-ROM is drive d) copy all the files and directory
to a floppy disk.
2. Booting from CD-ROM, when the
Windows XP Setup
blue
screen appear and prompt user to press F6 key to install
third party SCSI or RAID driver, please press F6 Key.
3. Press
S
key to specify additional devices when the
Windows XP Setup
window appears.
4. The system will ask whether to install driver under
WinNT
or
under
Windows XP
, please select to install driver under
Windows XP.
5. Insert the floppy disk of driver, then press
Enter
to continue.
6. In the follow-on window of device type, please select
HPT370/HPT372 UDMA/ATA RAID Controller for
Windows XP
to continue.
7. Win XP will prompt you that a message that the driver is
newer than the default driver, press S to continue.
8. The
follow-on
interface will list the devices to be installed, in
which
HPT370/ HPT372 UDMA/ATA RAID Controller
item
should be included. (If users want to install other devices,
please operate at this time. If all devices have been
successfully installed, please go to next.)
9. Press ENTER to continue Windows XP setup.
