Hardware Installation
SY-KT400 DRAGON Ultra
19
Step 3 Install Expansion Card
The motherboard has 1 AGP PRO slot and 5 PCI slots.
1. Read the related expansion card’s instruction document before inserting the
expansion card into the computer.
2. Press the expansion card firmly into expansion slot in motherboard.
3. Be sure the metal contacts on the card are indeed seated in the slot.
4. Replace the screw to secure the slot bracket of the expansion card.
5. Install
related
driver
from the operating system.
AGP Pro Slot
This motherboard supports AGP 4x/8x/Pro VGA CARD.
DO NOT remove the safety tab underneath it if you will be using an AGP card
without a retention notch. Removing may cause the card to shift and may cause
damage to your card, slot, and motherboard. Remove ONLY when you will be
using an AGP Pro card. You can use a pen tip to remove the tab from the bay.
When 8x VGA card is used, “AGP mode” option in the BIOS will be disabled
and the “DBI Output for AGP Trans” option will appear.
Note:
This Motherboard supports only 1.5 volts AGP card. Using 3.3v
AGP card might damage your M/B.
