Operating manual Soyer Bolzenschweißtechnik
59
12.1.2 Setting the welding current and the welding time
If you do not have specified values, the table in chapter
“12.1.1 Help tables for device
” on page 58 can be used as an aid for a basic setting.
Setting the welding current and the welding time
Step 1:
Connect the device as described in chapter
welding device and the stud welding guns
Step 2:
Use the
↑↓ arrow keys to select the
position for the welding current
setting.
The LED lights up if the selection is
correct.
Step 3:
Use the +/- keys to set the required
value for the welding current on the
display.
The welding current has been set.
Step 4:
Use the
↑↓ arrow keys to select the
position for the welding time setting.
The LED lights up if the selection is
correct.
Step 5:
Use the +/- keys to set the required
value for the welding time on the
display.
The welding time has been set.
Summary of Contents for BMK-10i
Page 2: ......