Operating manual Soyer Bolzenschweißtechnik
17
2.6.1
Incorrect use
Any use other than the intended use of the welding gun is deemed to be contrary to the
intended use.
Use other than the intended use, unauthorised modification or manipulation of the
device will void the declaration of conformity as well as all warranty claims against the
manufacturer.
Misuse of the welding gun as a tool, e.g. as a hammer for checking the weld quality, is
not permitted.
2.7
Operating company prerequisites
The operator of the device must ensure that the preconditions in this operating manual
are fulfilled for safe operation.
These include, for example, the conditions at the installation site, the official regulations
on requirements for a safe workplace, the training of the operating personnel and
qualified personnel in handling the device if necessary, fulfilment of the prescribed
maintenance work, and monitoring that the device is used in conformity with intended
use.
The operating manual must be stored in the vicinity of the device. The device operating
company must ensure that the device is only used when all protective equipment is
present, active and undamaged.
2.7.1
Prerequisites for personnel
Operating personnel
The personnel responsible for operating the device in normal operation must be familiar
with the device and trained accordingly. They must have read and understood the
operating manual. In addition, they must be capable of eliminating (or minimising as far
as possible) any possible remaining danger to themselves and third parties when
working with the device.
To retain this qualification, the safety training must be repeated annually. In the event
of a fault or if maintenance becomes necessary, consult specially trained qualified
personnel or the manufacturer.
Operators of stud welding equipment must have the expert knowledge for operating,
correctly setting the equipment and for properly carrying out the welding.
If the welders have to be qualified for certification of welding, the DIN EN ISO 14555
and DIN EN ISO 14732 standards must be observed.
Summary of Contents for BMK-10i
Page 2: ......