ST2883 Series Operation Manual Chapter 6 Introduction to [SYSTEM]
6-11
6.2.4.2
Access ST2883 through the Labview software
User can control ST2883 through Labview software. See Labview instruction manual for more details.
6.3 About
The About page shows some relevant information of the instrument, such as Model Number, Serial number,
Firmware Version, System Version. There are two soft keys available: Reset, Factory. Figure 6-11 shows the
About page.
Figure 6-11 About
Following soft keys can be used in the About page.
Reset
Press this key to reset the instrument.
Factory
Press this key to reset the instrument to factory settings.
