ST2883 Series Operation Manual Chapter 3 Panels and display
3-3
3.2 Rear panel
GND
FOOT.C
HANDLER
DEVICE
RS-232C
LAN
RATING
FUSE
T1AL
~
T2AL
110V
/ 60Hz
~
220V
/ 50Hz
HV
WARNING
THIS INSTRUMENT CONTAINS NO OPERATOR SERVICEABLE PARTS INSIDE;
REFER SERVICING TO SERVICE TRAINED PERSONNEL ONLY.
！
PLEASE READ MANUAL FOR SAFETY
DISCONNECT INPUT POWER BEFORE REPLACING FUSE FOR CONTINUED FIRE
PROTECTION,USE MANUAL SPECIFIED TYPE RATING FUSE ONLY.
！
Serial number Name
Instruction
1 HANDLER
interface
Comparison results are output via the
handler interface. You can also start or stop a
test through the interface.
2
USB DEVICE interface
A PC can remotely control ST2883 through
the USB DEVICE interface.
3
RS232C serial interface
RS232C serial interface can be connected to
an external device for remote control and
operation
4
LAN interface
Be used to connect network cable.
5 FOOT
CONTROL
A footswitch can be used to start a
measurement instead of pressing the START
key from the front panel.
6 Name
plate
Show manufacture date, model, batch
number, manufacturer, etc.
7 Fan
window
Discharge
heat.
8
Ground terminal
Ground the instrument shell.
9 Fuse
Fuse is used to protect the
instrument .220V/1A
10
3-wire power socket
Connect the power.
11 Test
terminal
High voltage output terminal, the function is
the same as that of the high voltage terminal
on the front panel.
12 Test
terminal
It is the GND terminal connected to the
DUT with 11 and 16 on the front panel.
Table 3-2 Rear Panel Instruction
