ST2883 Series Operation Manual Chapter 6 Introduction to [SYSTEM]
6-2
6.1.2 Pass/Fail
Move the cursor to this zone, following soft keys will be displayed.
On Turn on Pass/Fail display function.
Off Turn off Pass/Fail display function.
Lighten this key to enable the numerical arrow key. Respectively press 8, 2, 4, 6, the cursor will move
up, down, left and right.
6.1.3 Pass Alarm
Move the cursor to this zone, following soft keys will be displayed.
They are soft keys used to adjust the volume of the pass alarm. The lowest volume is mute.
Lighten this key to enable the numerical arrow key. Respectively press 8, 2, 4, 6, the cursor will move
up, down, left and right.
6.1.4 Fail Alarm
Move the cursor to this zone, following soft keys will be displayed.
They are soft keys used to adjust the volume of the fail alarm. The lowest volume is mute.
Lighten this key to enable the numerical arrow key. Respectively press 8, 2, 4, 6, the cursor will move up,
down, left and right.
6.1.5 Key Sound
Move the cursor to this zone, following soft keys will be displayed.
On Turn on the key sound.
Off Turn off the key sound.
Lighten this key to enable the numerical arrow key. Respectively press 8, 2, 4, 6, the cursor will move
up, down, left and right.
6.1.6 Hard Copy
Move the cursor to this zone, following soft keys will be displayed.
Full Full screen will be copied.
Wave Only wave zone will be copied.
Lighten this key to enable the numerical arrow key. Respectively press 8, 2, 4, 6, the cursor will move
up, down, left and right.
Note: Wave is valid only in the measurement display page. In the other pages, the default
copy zone is Full.
6.1.7 Password
Move the cursor to this zone, following soft keys will be displayed.
On Turn on the password function. When user turns on or unlocks the instrument, it is required to input
password.
Off Turn off the password function. When user turns on or unlocks the instrument, it is not required to
input password.
Note: When turning off the password function, it is required to input the password.
