ST2883 Series Operation Manual Chapter 6 Introduction to [SYSTEM]
6-3
Modify This key is used to modify the password. The instrument will prompt user to input old password,
new password and new password again in turn. (Press ESC to exit from modifying password.)
Note: Only numbers can be used as password.
Lighten this key to enable the numerical arrow key. Respectively press 8, 2, 4, 6, the cursor will move
up, down, left and right.
6.1.8 Language
Move the cursor to this zone, following soft keys will be displayed.
中文
Choose Chinese as the display and operation language.
English Choose English as the display and operation language.
Lighten this key to enable the numerical arrow key. Respectively press 8, 2, 4, 6, the cursor will move up,
down, left and right.
6.1.9 Theme
RoyalBlue
Seagreen
Steelblue
Indianred
6.1.10 Date
Date can be set in this zone. The display format is like 2011/05/04. Move the cursor to this zone, following soft
keys can be used.
They are soft keys used to adjust date by 1 day.
Lighten this key to enable the numerical arrow key. Respectively press 8, 2, 4, 6, the cursor will move up,
down, left and right.
Note: The date can be directly input by numeric keys. In the process of inputting numbers, soft keys
are not available. User can press ENTER to terminate inputting (In the state of inputting, if it is required
to exit from modifying, press ESC.).
6.1.11 Time
Time can be set in this zone. The display format is like 06:22:28. Move the cursor to this zone, following soft
keys can be used.
They are soft keys used to adjust time by 1.
Lighten this key to enable the numerical arrow key. Respectively press 8, 2, 4, 6, the cursor will move up,
down, left and right.
Note: The time can be directly input by numeric keys. In the process of inputting numbers, soft keys
are not available. User can press ENTER to terminate inputting (In the state of inputting, if it is required
to exit from modifying, press ESC.).
