5
ENGLISH
SPIRE XL 440 User manual
1) Water / Moisture
The apparatus should be protected from moisture and rain and can not be used near
water; for example near a bathtub, a kitchen sink, a swimming pool, etc.
2) Condensation
To avoid condensation to be formed inside, allow this unit to adapt to the surrounding
temperatures when bringing it into a warm room after transport. Condense sometimes
prevents the unit from working at full performance or may even cause damages.
3) Heat
The apparatus should be located away from heat sources such as radiators, stoves or
other appliances that produce heat.
Don not use it when maximum ambient tempera
-
ture is higher than 40°C This equipment shell temperature around 40°C (104°F) to 50 °C
(122°F) while work, do not touch the shell.
4) Ventilation
Do not block areas of ventilation opening. Failure to do could result in fire. Always
install according to the manufacturer’s instructions.
5) Object and Liquid Entry
Objects do not fall into and liquids are not spilled into the inside of the apparatus for
safety.
6) Power Cord and Plug
Protect power cord from being walked on or pinched particularly at plugs, convenience
receptacles, and the point where they exit from the apparatus. Do not defeat the safety
purpose of the polarized or grounding-type plug. A polarized plug has two poles; a
grounding-type plug has two poles and a third grounding terminal. The third prong is
provided for your safety. If the provided plug does not fit into your outlet, refer to an
electrician for replacement..
7) Power Supply
The apparatus should be connected to the power supply only of the type as marked on
the apparatus or described in the manual. Failure to do could result in damage to the
product and possibly the user. Check whether the power supply and voltage are normal
before use. If the voltage fluctuates greatly, it is recommended to use voltage stabilizer
or voltage regulatorUnplug this apparatus during lightning storms or when unused for
long periods of time.
8) Electrical Connection
Always disconnect from the power source before servicing or replacing fuse and be
sure to replace with same fuse size and type. Cut off power before moving, repairing
and cleaning the unit. Improper electrical wiring may invalidate the product warranty.
To avoid electric shock, all fixtures must be connected to circuits with a suitable ground.
