11
ENGLISH
SPIRE XL 440 User manual
The moving head can be placed directly on the floor or rigged in any orientation on a
truss, without altering its operation characteristics. Please refer to the picture below and
strictly follow the instructions.
5
1
2
3
5
5
4
90°
2
6
6
f
Use clamps suitable for the section of the truss on which you want to fix the mov
-
ing head.
f
Insert the screw in the central hole of the bracket n.2, and tighten the nut supplied
with the clamp (and any washers always supplied with the clamp).
f
Place the plugs with wings n.3 in the direction of the holes n.5 placed under the
base of the moving head. Screw them clockwise for about 90°, until you hear a click
that indicates the achievement of the correct and safe position.
f
Hook the moving head to the truss through the two clamps now perfectly fixed to
the base, and screw the wing-screw n.4 so as to tighten the moving head and avoid
as much as possible vibrations during the use of the fixture.
f
For overhead use, always install a safety rope that can hold at least 10 times the
weight of the fixture. Hook the safety cable to the hole n.6 located under the base
of the moving head.
