19
ENGLISH
SPIRE XL 440 User manual
Address
Workmode
Display
Scene
Advanced
Status
Escape
Screen Saver
DMX Signal LED
DMX LED Bright
010
Screen Light
English
OFF
Screen Rot
Auto
Mode3
010
Touch Enable
OFF
Touch Rectify
Language
In the first line at the top of the display, you can select the display language between
English and Chinese by touching one of the two options.
Screen Saver
Activates the screen saver and chooses among three modes (OFF, Mode1, Mode2,
Mode3). The screen saver selection could be done by touching the “Screen saver”
option.
Screen Rot
This option is used to select the screen direction. (Forward ,Reverse, Auto). The selec
-
tion could be done by touching the “Screen Rot” option.
When “Auto” mode is selected, the device position will be automatically detected and
then the display will be rotated in the right direction.
DMX Signal LED
It selects the indication mode for the SIG LED on the front panel.
-
Mode1:
The SIG LED lights on when there is a DMX signal and goes off
when there is no signal.
-
Mode2:
The SIG LED is off when there is a DMX signal and lights up when
there is no signal.
-
Mode3:
The SIG LED blinks when there is a DMX signal and goes off
when there is no signal.
DMX LED Bright
By touching the “Signal Bright” option with your finger, you can change the illumina
-
tion intensity of the SIG LED. A window will appear on the display where you can make
the change. By touching the / graphic buttons it is possible to increase/decrease
the LED SIG brightness. To save the set value touch the
graphic button. You can
also change the value by touching the red square and dragging it to the right or left as
shown in the figure below.
007
DMX LED Bright
