37
ENGLISH
SPIRE XL 440 User manual
12. TROUBLESHOOTING
Problem
Probable Cause(s)
Solution
No response from fixture
when power is applies
No power to fixture
Check power cable
Primary fuse blown
Replace fuse
Secondary fuse blown
Replace fuse
Fixture resets but does
not respond correctly to
controller
(DMX mode operation
)
Controller not connected
Connect controller
Incorrect addressing of the
fixtures
Check address setting on fixture and
controller
Bad data link connection
Inspect cables and correct poor con-
nections and/or broken cables.
Conflict between tracking and
vector control
Eliminate scene cross-fade on con-
troller
Data link not terminated
Insert termination plug in output of
last fixture
Defective fixture or 2 devices
transmitting on link
Bypass fixtures one at a time until
normal operation is regained:unplug
both connectors and connect them
directly together
Colors cannot be mixed
Random color mixing is on
Turn off random color mixing
Fixture does not reset
correctly
Electronic or mechanical
failure
Contact service technician
No light, lamp cuts out
intermittently,or burns
out too quickly
Lamp missing or blown
Disconnect fixture and replace lamp
Fixture or lamp is too hot
Allow fixture to cool. If problem per
-
sists,contact service technician
