25
ENGLISH
SPIRE XL 440 User manual
Data hold
This parameter can be ON/OFF. During the control from the DMX control unit, if the
function is OFF, by switching off the control unit, the moving head returns to the rest
position DMX. When the control unit is ON and the control unit is switched off, the
moving head keeps all the last values of the received DMX controls.
Light Up Mode
Use this parameter to set the lamp lighting mode.
- Manual:
The lamp can be switched on using the appropriate command in
the “Workmode” menu.
- RstDone:
The lamp will light up when the device is switched on only if,
before the last shutdown, a reset was made.
- PowerOn:
The lamp will be turned on every time the device is turned on.
Factory Setting
Using this option, the device will be reset with all the default settings.
9.6. Status Menu
This sub-menu can be accessed both from the main menu and from the window where
all the sub-menus are listed as shown in the figure below.
SUPER CMY SPOT 3IN1
001
23CHB 01. 01
00:58:17
ADDRESS
WORKMODE
DISPLAY
SCENE
ADVANCED
STATUS
001
12.0
NOR
FULL
Address
Workmode
Display
Scene
Advanced
Status
Escape
DMX Ctrl
Auto Run
Sound Ctrl
Scene Mode
Auto
M/S Choose
Master
L Switch
OFF
After selection, the display will show all the “Status” sub-menu options as shown in the
figure below.
Address
Workmode
Display
Scene
Advanced
Status
Escape
Fixture Status
Version Status
Light Time
Total Time
Stepper Info
Error Logging
166:16
114:34
A1. 0. 0
To select the options of this menu you can use the [UP] and [DOWN] buttons and then
the [ENTER] button on the control panel. The options can also be selected with the
touch of a finger directly on the screen
