illustrated below.
120ohm, 1/4W
resistor
DMX Terminator
Complimentary signal cable can transmits signals to 20 unit fixtures at most.
Signal amplifier is a must to connect more fixtures.
12.4. 3-Pin vs 5-Pin DMX cables
DMX connection protocols used by controllers and fixtures manufacturers are not stan-
dardized around the world. However, two are the most common standards: 5-Pin XLR
and 3-Pin XLR system. If you wish to connect SCENEMAKER 2416 to a 5-Pin XLR input
fixture, you need to use an adapter-cable or make it by yourself.
Following the wiring correspondence between 3-Pin and 5-Pin plug and socket stan-
dards
5-Pins XLR (plug)
Pin 1: GND (Screen)
Pin 2: Signal (-)
Pin 3: Signal (+)
Pin 4: N/C
Pin 5: N/C
3-Pins XLR (socket)
Pin 1: GND (Screen)
Pin 2: Signal (-)
Pin 3: Signal (+)
5-Pins XLR (socket)
Pin 1: GND (Screen)
Pin 2: Signal (-)
Pin 3: Signal (+)
Pin 4: N/C
Pin 5: N/C
3-Pins XLR (plug)
Pin 1: GND (Screen)
Pin 2: Signal (-)
Pin 3: Signal (+)
13. SPECIFICATIONS
Power Supply
DC 9V-12V, 500mA min.
USB Lamp
5V - 200 mA max
Protocols
DMX-512 USITT
Data Input
locking 3-pin XLR male socket
Data Output
locking 3-pin XLR female socket
Data Pin Configuration
Pin 1 shield, Pin 2 (-), Pin 3 (+)
Controller Size (WxHxD):
520 x 73 x 183 mm
Net Weight
2.7 kg
Packing Dimension (WxHxD):
610 x 135 x 210 mm
Packing Gross Weight:
3.4 kg
23
ENGLISH
SCENEMAKER 2416 User manual
