4.2. Rear Panel
MADE IN CHINA
DC Input
9V-1000mA
DMX
Output
MIDI
LAMP
POWER
DMX
Input
19
20
21
22
23
19. MIDI IN: For triggering of Banks/Chases using a MIDI device
20. DMX Out/In: These connectors send and receive your DMX values, DMX scanners
or DMX packs.
21. DC Input: DC 9 -12V, 500mA min.
22. USB Port: Used to connect a USB goose-neck lamp.
23. Power Switch: This switch turns On/Off the console.
4.3. Common Terms
The following are common terms used in intelligent light programming.
Blackout is a state by where all lighting fixtures light output are set to 0 or off, usually
on a temporary basis.
DMX-512 is an industry standard digital communication protocol used in entertain-
ment lighting equipment. For more information read Sections “12.1. DMX Introduction”
at page 21 and “12.2. Building a Serial DMX Chain” at page 22 in the Appendix.
Fixture refers to your lighting instrument or other device such as a moving head or
dimmer of which you can control.
Programs are a bunch of scenes stacked one after another. It can be programmed as
either a single scene or multiple scenes in sequence.
Scenes are static lighting states.
Sliders, also known as faders.
Chases can also be called programs. A chase consists of a bunch of scenes stacked one
after another.
Scanner refers to a lighting instrument with a Pan and Tilt mirror; however, the SCEN-
EMAKER 1216 PRO USB controller it can be used to control any DMX-512 compatible
10
ENGLISH
SCENEMAKER 2416 User manual
