1. Turn OFF the controller
2. Hold the
BLACKOUT
and
TAP SYNC/DISPLAY
buttons simultaneously.
3. Turn on the controller.
4. Press the
TAP/DISPLAY
button to toggle between the two modes. Either ALL CH
(A) or Pan & Tilt only (P).
5. Press
BLACKOUT
and
TAP SYNC/DISPLAY
to save settings. All LEDS will
blink to confirm setting.
6. OPERATION
6.1. Manual Mode
Manual mode allows direct control of all scanners. You are able to move them and
change attributes by using channel faders.
1. Press the
AUTO/DEL
button repeatedly until the
MANUAL
LED is lit.
2. Select a
SCANNER
button.
3. Move the faders to change fixture attributes.
4.
TAP/DISPLAY
button: Press to toggle the output indicator on LCD display be-
tween DMX values (0-255) or percentage (0-100).
NOTES: All changes made while in Manual Mode are temporary and will not
be recorded.
6.2. Review Scene Or Chase
This instruction assumes that you have already recorded scenes and chases on the con-
troller. Otherwise, please skip this section and go to programming.
SCENE Review
1. In manual mode, select one of the 30 banks by pressing the
BANK UP/DOWN
buttons.
2. Select a
SCENE
button (
1
to
8
) to review.
3. Move wheels and faders to change fixture attributes.
CHASE Review
1. In manual mode, press any one of the 6
CHASE
buttons.
13
ENGLISH
SCENEMAKER 2416 User manual
