SoundCraft Vi5000 Page 149 User Manual Download

Page: 149 / 225

Vi5000/7000 User Manual

16.1: MAIN MENU

16.1: MAIN MENU

MENU > MAIN

This menu tab is displayed by default whenever the [MENU] button is pressed.

Software and Platform version information

The currently loaded software version number is displayed. This will be in the form of a number YYMMDD-V6.x.x.xxx, and will

change when software updates (available from the Soundcraft website from time to time) are applied to the console.

The Platform version number denotes the operating system version which is not updatable except by replacing the console’s inter-

nal SSD drive. The version number will be in the fomat 7.x.x.x.

Soundcraft service agents may request interrogation of the platform and software version numbers when performing maintenance

or troubleshooting.

Desk Lock

Lock all switches, encoders, and faders on the console, except for the [LOCK] key.

Brightness

Choose the brightness level for all screens, illuminated keys, and FaderGlow.

Summary of Contents for Vi5000


































































































































































































































Search results

Summary of Contents for Vi5000

Reviews:

Related manuals for Vi5000

Brands by name

Popular brands

SoundCraft Vi5000, User Manual

Search results

Summary of Contents for Vi5000

Reviews:

Related manuals for Vi5000

Brands by name

Popular brands