SoundCraft Vi5000 User Manual Download Page 117

Page: 117 / 225

Vi5000/7000 User Manual

13.2.2: LIBRARY FILE SCREEN

13.2.2: LIBRARY FILE SCREEN

EDIT & LIBRARY > LIBRARY > FILE SCREEN

Directory UP

Navigate the file tree upwards, to the next 'parent' directory.

Name Folder/File

Name the currently highlighted Library or library item.

Delete Folder/File

Delete the currently highlighted Library or Library item.

You cannot delete a complete Library that is currently loaded.

Save As

Save a copy of the library under a new name.

New Library

Create a new (empty) User Library.

The {NEW} button only appears at the Library directory level.

Select Folder/File

Select the highlighted item.

Libraries that are currently loaded will have the {SEL} button and be labelled in yellow text. Libraries that are not
loaded have the {LOAD} button.

Summary of Contents for Vi5000


































































































































































































































Search results

Summary of Contents for Vi5000

Reviews:

Related manuals for Vi5000

Brands by name

Popular brands

SoundCraft Vi5000, User Manual

Search results

Summary of Contents for Vi5000

Reviews:

Related manuals for Vi5000

Brands by name

Popular brands