SoundCraft Vi5000 Page 15 User Manual Download

Page: 15 / 225

Vi5000/7000 User Manual

4.2.2: SCore FRONT PANEL

4.2.2: SCore FRONT PANEL

HARDWARE > LOCAL RACK > SCore FRONT PANEL

The status LEDs on the front panel of the SCore unit give an at-a-glance indication that the Local Rack is functioning

correctly, or that an error condition has occurred. An illuminated green LED indicates the presence of a card, an

illuminated red LED warns of a card error.

Note that there is a RECONFIG button behind a small hole at the bottom right of the panel. When pressed with a small

screwdriver or similar a reset is applied to the lower row of cards in the local rack: this will force a re-polling of the

loaded cards to reconfigure the console. This needs to be done only if the card configuration has been changed.

Summary of Contents for Vi5000


































































































































































































































Search results

Summary of Contents for Vi5000

Reviews:

Related manuals for Vi5000

Brands by name

Popular brands

SoundCraft Vi5000, User Manual

Search results

Summary of Contents for Vi5000

Reviews:

Related manuals for Vi5000

Brands by name

Popular brands