SoundCraft Vi5000 Page 37 User Manual Download

Page: 37 / 225

Vi5000/7000 User Manual

5.8: LABELLING

5.8: LABELLING

OPS OVERVIEW > LABELLING

The console labelling system is displayed on a touch-screen area whenever the labelling of a channel, output, cue,

file, or other named parameter or item is required. For example, you can label an input channel by touching the

channel’s input area on the touch screen then pressing the {CH LABEL} button in the VST area.

Labelling can be done with the displayed on-screen keyboard or an external USB keyboard. The on-screen keyboard

is context sensitive and shows only the allowed character and symbols.

Long Labels are displayed along the bottom of each touchscreen and can contain up to 10 characters. Short labels

are displayed on the LCD displays located on the Fader panel and can contain up to six characters.

Summary of Contents for Vi5000


































































































































































































































Search results

Summary of Contents for Vi5000

Reviews:

Related manuals for Vi5000

Brands by name

Popular brands

SoundCraft Vi5000, User Manual

Search results

Summary of Contents for Vi5000

Reviews:

Related manuals for Vi5000

Brands by name

Popular brands