SoundCraft RM1d, User Manual, Page: 70 / 142

70
RM1d/RM1ds User Guide
Continuous Talkback Mode
In this mode the selected Talkback channel can also talk directly to any one of the Line/
Cleanfeed Outputs.
Any output that is set-up as a Continuous Talkback output will receive the Talkback bus signal
as soon as the fader on the Talkback channel is closed.
1 Press the SETUP button found below the LCD display.
This will enter the SETUP mode
2 Use the PARAMETER encoder to scroll through the menu pages to locate the LINE/CF
OUTPUTS menu page.
The SETUP button will flash upon selection.
3 Press the SETUP button to enter the LINE/CF OUTPUTS set-up mode.
The LCD display will show:
4 Use the PARAMETER (ENCODER) to select which of the 1-4 (5-6) Line/Cleanfeed Outputs
you want to use.
5 Press the DOWN arrow button and then use the PARAMETER encoder to choose whether
Line/Cleanfeed
Outputs 1-2 and 3-4 (5-6) are configured to operate as individual mono outputs or
stereo pairs.
6 Press the RIGHT arrow key to enter the Channel Selection page
The LCD display will show
7 Use the PARAMETER encoder to select Continuous Talkback (Cont Talk)
8 Press the SETUP button to exit the Menu.