SoundCraft RM1d, User Manual

Page: 68 / 142

68
RM1d/RM1ds User Guide
Line/ CF Outputs Line/ CF Outputs
Line/ CF Outputs Line/ CF Outputs
Line/ CF Outputs
The RM1d has 4 (6) Line/Cleanfeed outputs that can be used either as Direct Outputs (Post-
Fade) for any mixer channel, or for creating a ‘Mix Minus’ output from either of the STE 1
(PROG)
or STE 2 (AUD) busses. (This is useful for sending a cleanfeed signal back to an incoming
telephone caller).
The Talkback bus can also be routed to any of the 4 (6) Line/Cleanfeed outputs in Continuous
Talkback mode. This allows any microphone channel that has been set-up as a Talkback
channel to speak directly to a designated Line/Cleanfeed output as soon as the Talkback bus
is activated. This is intended for feeding the designated talkback microphone signal to an
external talkback routing system.
Any of the 4 (6) Line/Cleanfeed Outputs can be configured as mono Direct Outputs for a
selected channel (e.g. for use with a single microphone), or as a ‘mono summed’ outputs if the
channel has been set-up as a stereo channel (e.g. a CD player).
Stereo Direct Outputs can also be achieved by linking Line Outputs1-2 and 3-4 (5-6).
Configuring a Channel as a Direct Output
1 Press the SETUP button found below the LCD display.
This will enter the SETUP mode
2 Use the PARAMETER encoder to scroll through the menu pages to locate the LINE/CF
OUTPUTS menu page.
The SETUP button will flash upon selection.
3 Press the SETUP button to enter the LINE/CF OUTPUTS set-up mode.
The LCD display will show:
4 Use the PARAMETER (ENCODER) to select which of the 1-4 (5-6) Line/Cleanfeed
Outputs you want to use.
5 Press the DOWN arrow button and then use the PARAMETER encoder to choose
whether Line/Cleanfeeds Outputs 1-2 and 3-4 are configured to operate as
individual mono outputs or stereo pairs.
6 Press the RIGHT arrow button to enter Channel Selection page
The LCD display will show:
7 Press the UP arrow button and then use the PARAMETER encoder to select Direct OP
mode (the other choices are Ste 1 (PROG) Mix -, Ste 2 (AUD) Mix -, Cont Talk and
Unsourced.)