SoundCraft RM1d, User Manual

Page: 58 / 142

58
RM1d/RM1ds User Guide
Channel Phases Channel Phases
Channel Phases Channel Phases
Channel Phases
It may be necessary in certain applications to reverse the phase of one side of an incoming
stereo source to correct for phase problems. There may also be times when inverting the phase
of an incoming microphone (mono) may be necessary to prevent phase problems with other
microphones set up nearby.
Reversing the Phase of a Stereo or Mono Input Source
1 Press the SETUP button found below the LCD display.
This will enter the SETUP mode
2 Use the PARAMETER encoder to scroll through the menu pages to locate the
CHANNEL PHASES menu page.
The SETUP button will flash upon selection.
3 Press the SETUP button to enter the CHANNEL PHASES set-up mode.
The LCD display will show the current selection:
4 Press the EDIT button on the channel you want to edit. The number of the selected
channel should appear in the LCD display. The display will also show whether the
selected channel is mono or stereo.
5 Use the down arrow button to select the normal/inverted field of the display.
6 You may now use the parameter encoder to select between ‘normal’ or ‘ inverted’.
7 Press the SETUP button to exit the Menu.