Soucy S-TECH 7016, Installation, Operation And Maintenance Manual

Page: 12 / 84

3.2 SAFETY SIGNS USED IN THIS GUIDE
• The following signal words are used throughout this guide per ANSI Z535.4-2007 (Product Safety Signs and Labels):
EXAMPLE
DANGER
DANGER INDICATES A HAZARDOUS SITUATION WHICH, IF NOT AVOIDED, WILL RESULT IN
DEATH OR SERIOUS INJURY;
WARNING
WARNING INDICATES A HAZARDOUS SITUATION WHICH, IF NOT AVOIDED, COULD RESULT
IN DEATH OR SERIOUS INJURY;
CAUTION
CAUTION INDICATES A HAZARDOUS SITUATION WHICH, IF NOT AVOIDED, COULD RESULT IN
MINOR OR MODERATE INJURY;
NOTICE
NOTICE INDICATES INFORMATION CONSIDERED IMPORTANT, BUT NOT HAZARD-RELATED
(E.G., MESSAGES RELATING TO PROPERTY DAMAGE);
3.3 SAFETY INSTRUCTIONS
• Two people are required to install or remove a track system. Use jacks, hoist or lift when manipulating heavy parts.
• Make sure no one is in the danger zone of the vehicle while the engine is running or the vehicle is moving.
• Read your vehicle owner’s manual before you use it with Soucy Track systems.
• Check that safety stickers are intact and visible. Replace damaged or illegible stickers.
• Read the installation, operation and maintenance guide of your Soucy Track system before installing and operating
your system.
• Make sure the lifting equipment has the capacity to keep the vehicle stable during installation of the system.
Inadequate lifting equipment can lead to unstable vehicle that can cause severe injuries or death.
• Check bolts and nuts tightening after the first two hours of use. Loosened hardware can lead to damage to
components, detracking and severe injuries or death.
INSTALLATION, OPERATION AND MAINTENANCE GUIDE 8