Soucy S-TECH 7016 Installation, Operation And Maintenance Manual Download Page 19

Page: 19 / 84

SECTION 5 PREPARATION

5.1 TOOLS LIST

The following tools are required to install the track system on a tractor:

•

Metric tools box

•

Impact wrench

•

Impact sockets: 13, 21, 24, 30 and 36 mm.

•

Wrench: 13, 21, 24, 30 and 36 mm.

•

Fork lift and/or crane

•

Torque wrench

•

Bottle jack (18 in. of stroke)

•

Jack stands (65 to 80 in.)

•

M20 X 2.5 Tap

5.2 PREPARATION

•

Make sure you have all the required parts and tools to do the job. The parts should be clean and free of corrosion.

•

Familiarize yourself with components and their location.

•

The systems installation sequence is front/rear or rear/front,

NOT

left/right, right/left or diagonally.

INSTALLATION, OPERATION AND MAINTENANCE GUIDE

Summary of Contents for S-TECH 7016





















































































Search results

Summary of Contents for S-TECH 7016

Reviews:

Related manuals for S-TECH 7016

Brands by name

Popular brands

Soucy S-TECH 7016, Installation, Operation And Maintenance Manual

Search results

Summary of Contents for S-TECH 7016

Reviews:

Related manuals for S-TECH 7016

Brands by name

Popular brands