11.5 OTHER CONDITIONS
•
Warranty track must be purchased within 90 days of approval of the claim.
•
The manufacturer reserves the right to claim the track for a period of three months to conduct product improvement
verifications.
•
The manufacturer reserves the right to cancel in part or in whole the warranty if an evidence of non-compliance is
determined.
1.
Method to measure the height of the tread:
a.
Place the rubber track into a position so that the tread is straight and flat.
b.
Use a straight edge and a tape measure:
•
Measure the height of the thread remaining in each raceway of tracks (the straight edge parallel to the flange
of the track and centered on the thinnest point is the centre of the wheels).
c.
Repeat the measurement at 3 locations along the length of the track.
d.
Record each of the dimensions on a sketch of the track.
INSTALLATION, OPERATION AND MAINTENANCE GUIDE
76
Summary of Contents for S-TECH 7016
