background image

Service Record Mio Carbon (Design 2018)

23 of 28

2020-09-01

4  Repairs and maintenance

4.1  Repairs

Repairs are to be done by your specialized retailer. 

4.2  Spare parts

Only original spare parts can be used! They are available at your medical supply store. 

 

The spare parts list can be downloaded at www.sorgrollstuhltechnik.de or can be reques-

ted directly from us.

For a correct delivery of spare parts the appropriate serial number of the wheelchair is to be 

stated. You will find the number on the type label on the wheelchair's frame.

 

4.3  Maintenance

Clean the wheelchair and all components regularly with a mild household water-based cleaner 

and then dry it thoroughly.
In addition, clean the rear wheels and the casters and free the axles of dirt and impurities e.g. 

hair etc.). 
Wash textile parts:

care directions:

Wipe off pleather, straps and other upholstery: 

Care directions:

4.4  Disinfection

Before each disinfection the parts should be cleaned off first. For disinfection use a household 

water-based agent. Observe the instructions of the respective manufacturer. 

4.5  Storage

•  Carry out cleaning

•  Fold foldable wheelchair (if available) 

•  Adjust seat tilt to 90° (if available)

•  If necessary, pack removable textile parts in foil or similar

•  Secure the wheelchair from rolling away and getting dirty

• 

Store in a dry environment without aggressive environmental influences. 

Summary of Contents for Mio Carbon





























Reviews: