12 of 28
Service Record Mio Carbon (Design 2018)
2020-09-01
3.2.7 Seat depth
(1)
(A)
(3)
(A)
(2)
(A)
(B)
3.2 Assembly group seat
There are three ways you can change the seat
depth:
• by moving the seat plate,
• by moving the seat supporting angle,
•
by moving the firm curved back plate.
In the pictures you can see the delivery status
of the mio
• (1)
Seat plate at the very back of the
seat supporting angle
(2B)
, so that it
stands at the rear approx. 20-30 mm
/ 2-3 cm beyond the firm curved back
plate)
• (2)
seat supporting angle mounted at
the very front,
• (3)
Backrest mounted at the back.
In this state, the seat depth can be continuous-
ly extended by moving the seat plate forwards
by approx. 40 mm / 4 cm and by moving the
firm curved back plate to the back, another 30
mm / 3 cm. The position of the seat support
angle affects the user's center of gravity and
gripping path.
3.2.8 Move seat plate
• (1)
Loosen screw connections
(A)
on
both sides,
• move the seat plate to the desired po-
sition,
• Tighten screw connections again.
(1)
(A)
