22 of 28
Service Record Mio Carbon (Design 2018)
2020-09-01
3.9.1 Settings
3.9 Assembly group outdoor front end
Length of the outdoor front end
With the length of the outdoor front end you
can adjust the driving and sliding comfort:
• long outdoor front end = very strong
absorption of shocks, very soft ride
comfort, good drive and sliding eco-
nomy, large turning radius.
• short outdoor front end = good ab-
sorption of shocks, very good drive
and sliding economy, well suited for
active driving, small turning circle.
(1)
For telescoping the length:
• Remove both screws
(A)
,
• move the front part
(B)
of the outdoor
front end together with the screws
(A)
forwards or backwards by the desired
number of holes
(C)
• and tighten the screws
(A)
firmly.
The holes are spaced 20 mm apart.
The front part
(B)
of the outdoor front
end must always be fixed in the telescopic
tube
(D)
with both screws
(A)
.
Mount the outdoor front end
• Close the parking brakes of the
wheelchair.
• Tilt the wheelchair slightly backwards
or place it on the jack-up aid.
• (2)
Insert the end of the cone tube
(A)
into the retaining plate
(B)
from the
front.
• Then guide the height adjustment
(C)
to the stop
(D)
.
• (3)
The two bushings
(A)
of the height
adjustment
(B)
must be inserted into
the locating holes
(C)
of the retaining
plate
(D)
.
• (4)
Turn the star knob
(A)
on the back
of the retaining plate
(B)
as firmly as
possible, because it will fix the outdoor
front end to the wheelchair.
To dismantle the outdoor front end please
proceed in reverse / analogue order.
The outdoor front end may only
be mounted if there is no user in the
wheelchair.
(A)
(C)
(B)
(1)
(2)
(A)
(C)
(B)
(D)
(3)
(A)
(C)
(D)
(B)
(4)
(A)
(B)
